PRODUCT / PoE SWITCHES / RGT-1404M-E

RGT-1404M-E

4-to-4 Gigabit PoE Injector

■ Complies with IEEE802.3 10BASE-T Ethernet standards
■ Complies with IEEE802.3u 100BASE-TX Fast Ethernet
■ Supports IEEE802.3ab 1000BASE-T Gigabit Ethernet
■ Supports IEEE802.3af power over
■ Supports IEEE802.3at Power over

Overview

RGT-1404M-E is 4-to-4 PoE+ Injector and complies with IEEE 802.3af/at standard. Connect a non-PoE switch and run an Ethernet cable to network PoE devices. No need to buy a PoE switch and save installation and equipment costs. It can be worked with all IEEE 802.3af/at PoE compliant PDs to expand your network to where there are no power line or outlet, where you wish to fix device such as AP, IP Camera or IP Phone, etc.

Specifications

Interface
  • In (Data):4*10/100/1000 Mbps RJ-45 ports
  • Out (Data+PoE):4*10/100/1000 Mbps RJ-45 ports
PoE ports
  • 4-port IEEE802.3af/at
MAC Address Table
  • 2 K
Buffer Memory
  • 128KB
Jumbo Frame
  • 9KB
LED Define
  • Power: LED with Green
    •   Off: Power off or fail
      On: Power on
  • PoE: LED with Amber
    Off: PoE disconnected or power not supplied
    On: PoE connected
PoE Budget
  • 65W(TOPOW)
  • 75W(FSP)
Power
  • External Power Supply, 100-240V AC
  • 50/60Hz Maximum 71W
  • 50/60Hz Maximum 90W
Temperature
  • Operating: 0°C ~ 40°C
  • Storage: -20°C ~ +70°C
Humidity
  • Operating: 10% ~ 90% RH, non-condensing
  • Storage   : 5%~90% RH, non-condensing
Dimensions
  • 126.4 (L) X 73.95 (W) X 32(H)mm
Certifications
  • CE/FCC/LVD compliance
RoHS
  • RoHS compliance